{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. You may need to import it above. */

{% set headerFontFamily = "Open Sans" %} /* This affects only headers on the site. Add the font family you wish to use. You may need to import it above. */

{% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */

{% set pageCenter = "1100px" %} /* This sets the width of the website */

{% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */

{% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */

{% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */

After you have updated your stylesheet, make sure you turn this module off

NEW - Heavy Duty Rocker Arm Stud Kits for High-Performance M8 Engines

by Jon Montgomery on October 23, 2019

900-1013_lifestyle (1)

Big power can push even the most unexpected parts to their limits and the Rocker Arm Studs in the M8 engines are high on that list. S&S Cycle is the go-to for big power and is obviously an expert on the details that make sure it’s reliable. “The rocker arm stands on the M8 heads are a weak spot, they are cast into the head and have a history of stripping when over-torqued once stripped, the head must be replaced. The S&S Rocker Arm stud kit allows a one-time installation of a stud that replaces the stock bolt. This greatly reduces the chances of damage to the heads, prolonging life and increasing the strength of the rocker arm mounts to handle the added demands of high lift cams and heavy-duty valve springs.” States Pete Winnie, VP of R&D at S&S Cycle. If you’re doing a big bore kit, head work or any other top-end mods, we recommend adding a set of S&S Rocker Arm Studs. For more info on these and other mods for the M8 engine, click here

900-1013

 

Subscribe to Email Updates

Recent Articles

Popular Posts